Turbo Oil Line Kit for Honda/Acura Vehicles
This is a Turbo feed and drain kit that uses a tuner toys block fitting and -3 stainless steel line (4ft). The block fitting, FOR HONDA MOTORS (B, D, etc...) has the correct 1/8 bspt threads for the oil pressure sending port. (Most oil lines come with 1/8 npt threads which are incorrect and may strip the block.) The same 1/8 bspt threads in the back the fitting for the reusage of the stock oil pressure sender.

Dual 1/8 npt ports are off the side of the fitting. One is for the oil feed line, and one maybe used for other applications (Gauges, ls/vtec, etc...). The drain consists of a tuner toys oil drain flange with a barbed fitting connecting the drain flange to the -10 stainless drain hose (14"). We use a barbed fitting on the lower end for the pan as well. Kit comes with everything you see.

PLEASE READ THE TEXT BELOW CAREFULLY WHEN SELECTING THE PROPER OIL LINE KIT

14B (Tdo4h) Turbo Oil Line
14B uses a M12x1.25 thread size for the oil inlet. The drain flange from center to center mounting bolts measures 38mm. This kit does not come with the mounting bolts to bolt the drain flange onto the turbo. There are many different sizes used on different variations of the 14B, leaving us to choose not to carry them.

T25 Turbo Oil Line
kit uses a 7/16 thread size for the oil inlet. The drain flange from center to center mounting bolts measures 44mm.

T3 Turbo Oil Line
kit uses a 1/8 thread size for the oil inlet. The drain flange from center to center mounting bolts measures 50.8 mm.

T3 Turbo Specia Turbo Oil Line
kit uses a 1/4 thread size for the oil inlet. The drain flange from center to center mounting bolts measures 50.8 mm. It also uses different mounting bolts for the drain flange. This has only been found on new turbos thus far.

GT Series Turbo Oil Line
kit uses a 7/16 thread size for the oil inlet. The drain flange from center to center mounting bolts measures 50.8 mm. This is for the GT35r, GT28 ect turbos.

Please specify which kit you would like if you pay with a money order.

If you do not see your turbo listed, we can still provide you with a kit, for the same price. We need 2 measurements from you though. The C-C measurement of the mounting holes of the drain side, and the Inlet Thread size.

Be sure to check out our oil line firewall kit as well as our restrictor valve kit.

As always, CONTACT US with any questions before ordering

$85.00 shipped to lower 48